HP Camera settings so Webcam On Ubuntu

The following documentation is how to make hp camera into a webcam so that we can utilize a relatively rare feature to be utilized. for this documentation uses MT6225 device that is usually embedded in china hp products ex. beyond, nexian etc.
hp coincidence that in use is beyond.

The following are the steps:

~ Connect the hp to usbnya cable company, then the mob will see several menus and select the webcam.
~ Check whether the device detected
$ Sudo dmesg | grep usb

aq get the following pieces:

..
[257.124039] usb 2-2: new full speed USB device using uhci_hcd and address 2
[257.341679] usb 2-2: configuration # 1 chosen from 1 choice
[257.372519] input: MT6225 as / devices/pci0000: 00/0000: 00:1 d.0/usb2/2-2/2-2: 1.0/input/input10
[696.552127] usb 2-2: USB disconnect, address 2
[726.192072] usb 2-2: new full speed USB device using uhci_hcd and address 3
[726.465646] usb 2-2: configuration # 1 chosen from 1 choice
[726.496515] input: MT6225 as / devices/pci0000: 00/0000: 00:1 d.0/usb2/2-2/2-2: 1.0/input/input11
[1664.000121] usb 2-2: USB disconnect, address 3

if you find such information can be ascertained that means your device has been detected hp

~ Install UVC webcam driver
$ Sudo apt-get install luvcview
$ Sudo apt-get install uvccapture

if it is now open your cheese applications.
$ Sudo cheese
if not already installed to do the installation.
$ Sudo apt-get install cheese

you can now has an webcam that can be taken anywhere

Setting Modem in Ubuntu Venus VT12

One interesting experience is when I create a Dial-Up Modem CDMA Modem VT12 use with Flexi Card Unlimited.

Basically, CDMA Modem setting in all Linux distributions the same, also on Ubuntu. The advantages are most felt when setting up the CDMA modem in Ubuntu is that we do not require special drivers, different from the "Window" which requires us to install the drivers built-Venus VT12.

Setting Dial Up Modem Venus VT12 in Ubuntu is very easy, even for newbie.
steps are:

1. Plug the modem into the Company and make sure the modem is already kedetek ama Ubuntu

To check if your modem is already kedetek what has not lived her entrance at Terminal Ubuntu then type "dmesg". Klo dah words "ttyUSB0" or "ttyUSB1" or "ttyUSB2", etc. in one row of the result command "dmesg" means the modem was successfully recognized by Ubuntu dah. This applies not only to modems Venus, but for other modems.


2. One of the tools to create a Dial Up is the "wvdial". To install wvdial please download here. Then the downloaded earlier in the extract into a folder, for example extracted in / home/Venus12


3.ketikkan command in the terminal

caprone @ ubuntu-desktop: ~ $ cd / home/Venus12

sudo dpkg-i *. deb


4.edit wvdial configuration by typing the command in terminal

gksudo gedit / etc / wvdial.conf

replace commands in the wvdial.conf with the following command


[Dialer Flexi]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0 = 0 & C1 & D2 FCLASS = 0
Modem Type = Analog Modem
Baud = 230 400
New Grab Bag = yes
Modem = / dev/ttyUSB0
ISDN = 0
Phone = # 777
Password = telkom
Username = xxxxxxxxx @ free
FlowControl = crtscts
Stupid Mode = 1
Compuserve = 0
Idle Seconds = 300

Save and exit

5.Untuk to dial the modem type the command "sudo wvdial" (without the quotes)
kalo dah no writing

Primary IP Address: xxx.xxx.xxx.xxx
Secondary IP Address: xxx.xxx.xxx.xxx

at the end of the text that appears, then the connection is successful dah. Continue by browsing .....

6.Untuk disconnect just press the "Ctrl c"
Those are some steps setting wvdial using VT12 Modem in Ubuntu.

Hopefully help ......

after getting no IP
then you can surf. if it is not used, you can stop the software with Ctrl c

Download wvdial here

Setting Smart Modem in Ubuntu

1. plug the modem via the data cable to our computer, then go into terminal (applications> accessories> terminal) and login as root with sudo su command our attention with the command lsusb and there is the addition of new devices ... there is not yet kedeteksi brand by kita.kita remove kernel modules usbserial who mistakenly detecting devices using modprobe-r usbserial

2. use modprobe usbserial vendor = 0 × 15eb product = 0 × 0001

the results we detected the modem as ttyUSB0 and ttyUSB1 we can see with dmesg command

download and install it all and install in Ubuntu;

http://packages.ubuntu.com/jaunty/i386/libxplc0.3.13/download

http://packages.ubuntu.com/jaunty/i386/libwvstreams4.4-base/download

http://packages.ubuntu.com/jaunty/i386/libwvstreams4.4-ext...ras/download

http://packages.ubuntu.com/jaunty/i386/libuniconf4.4/download

http://packages.ubuntu.com/jaunty/i386/wvdial/download

3. After a successful install wvdial above, edit the wvdial in the following manner:

$ Sudo gedit / etc / wvdial.conf

enter the following configuration:

[Dialer Smart]

Init1 = ATZ
Init2 = ATQ0 V1 E1 S0 = 0 & C1 & D2 FCLASS = 0
Init3 = at crm = 1; cmux = 1; cps = 33; CTA = 0
Modem Type = Analog Modem
ISDN = 0
Phone = # 777
Modem = / dev/ttyUSB0
Username = smart
Password = smart
Baud = 460 800
Stupid Mode = 1

Then do the ppp configuration settings by typing:

$ Sudo gedit / etc / ppp / options

asyncmap 0
noauth
crtscts
modem
proxyarp
noipx
persist
idle 1000000

After all done live type wrote:

$ Sudo wvdial Smart

Oh yes do not forget this gives a chance then firefox will be offline modes, to make browsing first remove the check in work offline from the file menu in your firefox.

to disconect press CTRL-C wrote

What is System Volume Information???

If you are using Windows XP Home or Professional, and settings for the folders are hidden (Hidden system) is displayed, you will see a folder named "System Volume Information" on drive C: D: and others. Sometimes we can not open this folder, or if you can, then to access the file can not. Actually, what function or purpose of this folder?

Folder "System Volume Information" is a Hidden System folder (a hidden folder / deliberately hidden by the windows system) used by System Restore to store information and restore points. But this time is often a virus nest

As is known, that Windows XP Home / Professional includes a Restore Point function, namely the facility to cope when there is a new program is installed and cause computer problems, to restore the windows for a moment / time before the new program is installed (called a Restore Point). When you do restore the computer, data or documents will not be lost. Well, the data restore points are saved in a folder named "System Volume Information" is.

This folder will exist on each drive / partition windows, for example C:, D: and others. Indeed see folders function is quite important, but sometimes can be dangerous. Because access is limited, then this folder is often used by viruses to save duplication of himself and a virus can attack again (back on) if you do a restore. In addition, we usually can not access this folder. Even antivirus detects a virus in this folder sometimes can not remove it.

Actually, if it is not so important this facility can be turned off, because in addition often a virus nest, too often takes quite a lot of disk space. To set it can open the Start Menu> All Programs> Accessories> System Tools> System Restore. To turn off this feature checks the menu "Turn off System Restore for all drives".

If you believe your computer is virus free, then these facilities can also be activated, which needs to be regulated may only use hard drive space. Each drive C:, D: and others can be limited to maximum use of his space by clicking the Settings button on each drive.

Is there a way to access this folder?

Yes, there are several different ways on how to access this folder. To note only the windows that are used (Home or Professional) and type of file system (FAT32 or NTFS) that can be known by the right-click Drive C:, D: or others in windows explorer and select Properties.

Source: Ebsoft

Introduction and Explanation Computers

Computers in the term has different meanings for everyone. The term comes from the Latin "computare" which means to calculate / to reckon

According Blissmer (1985), the computer is an electronic device capable of performing several tasks, namely to receive input, process the input according to the instructions given, keep the commandments and the results of its processing, and provides output in the form of information.

According to Sanders (1985), the computer is an electronic system to manipulate data quickly and accurately as well as designed and organized in order to automatically receive and store input data, process it, and produce output based on instructions that have been stored in the memory. And many more experts who are trying to define it differently on the computer. However, in essence it can be concluded that the computer is
an electronic device that can receive input, process input, provide information, using a program stored in computer memory, can store programs and data processing, and works automatically.

From the definition, there are three important terms, namely the input (data), data processing, and information (output). Data processing using a computer is known as electronic data processing (PDE) or elecronic data processing (EDP). Data is a collection of events that removed from a fact (fact), can be numbers, letters, special symbols, or combination of all three. The data still can not tell you much that needs to be further processed.

Data processing is a process of manipulation of data into a form that is more useful and more means, namely in the form of an information. Thus, information is the result of a data processing activities that provide a more meaningful form of a fact. Therefore, electronic data processing is the process of manipulation of data into more meaningful form of an information by using an electronic device, namely a computer.

Contact Us

Ujie Caprone
T. Wan Abdul Rahman Street
Hill district highway
Pekanbaru City - Riau Province
Indonesia
Email: ujie_caprone@yahoo.com

============================

Ujie Caprone
Jl. T. Wan Abdul Rahman
Pekanbaru - Riau
Kec. Bukit Raya
Indonesia
Email: ujie_caprone@yahoo.com

About Me

Here I try to share what I know, especially about computers, Internet, Web Blog, and Techniques of Hacking. It has been my first post on my blog before but this time I will share in English only.


OK, without a lot of the story is good that we continue to read my articles that I provide on this website.