Assorted Free Website Templates, Free Blogger Template, Free WordPress Templates, Free Joomla Templates, Free osCommerce Templates, Free Drupal Templates, etc

Kamis, 28 Oktober 2010

Setting Modem in Ubuntu Venus VT12

Posted by Ujie Caprone 08.04, under ,,, | No comments

One interesting experience is when I create a Dial-Up Modem CDMA Modem VT12 use with Flexi Card Unlimited.

Basically, CDMA Modem setting in all Linux distributions the same, also on Ubuntu. The advantages are most felt when setting up the CDMA modem in Ubuntu is that we do not require special drivers, different from the "Window" which requires us to install the drivers built-Venus VT12.

Setting Dial Up Modem Venus VT12 in Ubuntu is very easy, even for newbie.
steps are:

1. Plug the modem into the Company and make sure the modem is already kedetek ama Ubuntu

To check if your modem is already kedetek what has not lived her entrance at Terminal Ubuntu then type "dmesg". Klo dah words "ttyUSB0" or "ttyUSB1" or "ttyUSB2", etc. in one row of the result command "dmesg" means the modem was successfully recognized by Ubuntu dah. This applies not only to modems Venus, but for other modems.


2. One of the tools to create a Dial Up is the "wvdial". To install wvdial please download here. Then the downloaded earlier in the extract into a folder, for example extracted in / home/Venus12


3.ketikkan command in the terminal

caprone @ ubuntu-desktop: ~ $ cd / home/Venus12

sudo dpkg-i *. deb


4.edit wvdial configuration by typing the command in terminal

gksudo gedit / etc / wvdial.conf

replace commands in the wvdial.conf with the following command


[Dialer Flexi]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0 = 0 & C1 & D2 FCLASS = 0
Modem Type = Analog Modem
Baud = 230 400
New Grab Bag = yes
Modem = / dev/ttyUSB0
ISDN = 0
Phone = # 777
Password = telkom
Username = xxxxxxxxx @ free
FlowControl = crtscts
Stupid Mode = 1
Compuserve = 0
Idle Seconds = 300

Save and exit

5.Untuk to dial the modem type the command "sudo wvdial" (without the quotes)
kalo dah no writing

Primary IP Address: xxx.xxx.xxx.xxx
Secondary IP Address: xxx.xxx.xxx.xxx

at the end of the text that appears, then the connection is successful dah. Continue by browsing .....

6.Untuk disconnect just press the "Ctrl c"
Those are some steps setting wvdial using VT12 Modem in Ubuntu.

Hopefully help ......

after getting no IP
then you can surf. if it is not used, you can stop the software with Ctrl c

Download wvdial here

0 komentar:

Posting Komentar